Drivers ADTEC USB/ATAPI Bridge Adapter

Posted By admin On 31/01/22

Vendor: I-O Data Device, Inc. / Device: USB2-IDE/ATAPI Bridge Adapter. Combine SU2-ATAPI and our INT-USB cable, system builder can utilize existing USB host connection in mother server board, workstation to boot from Slim ATAPI drive. Part 4 This part is an usb to ata atapi bridge driver windows 8. Usb To Serial Ata Bridge Driver for Windows 7 32 bit, Windows 7 64 bit, Windows 10, 8, XP. BAFO USB-ATA/ATAPI Bridge Controller – Device Driver Download. My experience with a cheap kit on eBay: I looked it up and since Atapi4 bridge controller have files of all sorts of sizes, the best allocation size is the default one. Thanks, I had ataip4 same problem. USB ATAPI Storage Device The USB 2.0 to IDE Drive Adapter is a connection bridge between a USB port and an ATA or ATAPI-based port. This USB 2.0 to IDE Drive Adapter is capable of transforming an IDE drive into a handy external drive. Users can easily move files between computers, laptops, and drives for back up and access.

  1. Drivers Adtec Usb/atapi Bridge Adapter Download
  2. Drivers Adtec Usb/atapi Bridge Adapter Usb

The most complete collection of drivers for your computer!

Drivers Catalog ⇒ USB Devices ⇒ ADTEC ⇒ ADTEC USB/ATAPI Bridge Adapter

Drivers Installer for ADTEC USB/ATAPI Bridge Adapter

If you don’t want to waste time on hunting after the needed driver for your PC, feel free to use a dedicated self-acting installer. It will select only qualified and updated drivers for all hardware parts all alone. To download SCI Drivers Installer, follow this link.

Device:ADTEC USB/ATAPI Bridge Adapter Drivers Installer
File Size:1.12 Mb
Supported OS:Windows 2000, Windows XP, Windows Vista, Windows 7, Windows 8
Download Drivers Installer

ADTEC USB/ATAPI Bridge Adapter: Drivers List

1 drivers are found for ‘ADTEC USB/ATAPI Bridge Adapter’. To download the needed driver, select it from the list below and click at ‘Download’ button. Please, ensure that the driver version totally corresponds to your OS requirements in order to provide for its operational accuracy.

ADTEC USB/ATAPI Bridge Adapter: Supported Models of Laptops

We have compiled a list of popular laptops models applicable for the installation of ‘ADTEC USB/ATAPI Bridge Adapter’. By clicking at the targeted laptop model, you’ll be able to look through a comprehensive list of compatible devices.

1ToshibaTECRA R840-10T34 Devices List
2FujitsuFMVK30C13128 Devices List
3IntelPINOLE C 220 Devices List
4PanasonicCF-SX2JDR1FW30 Devices List
5NECPC-GV30HTZG417 Devices List
6ToshibaPORTEGE R830-10V33 Devices List
7HPRK571AAR-ABA m778037 Devices List
SilverStone FW and FQ Fans: an Ideal Balance between Efficiency and Tranquility
NEC Announces PA322UHD Monitor with OPS Interfaces
ASRock Strikes with a New Flagship X99 Extreme11 Motherboard
Sony Updates eXtra Bass Series of Headphones

How-To Geek Forums / Windows XP

(Solved) - IDE/SATA to USB bridge problem

(4 posts)

This is a bit odd.

I had an old WD 40GB IDE HDD connected to my PC running XP Pro SP2 via an IDE/SATA to USB bridge, just plugged into a USB 2.0 port. It was working fine until I plugged in an even older Maxtor 40GB ATA HDD instead. Both devices worked fine until I re-formatted the Maxtor one using Partition Commander. Now, neither drive is showing up in My Computer. In device manager, it says that my IDE/SATA to USB bridge is actually a USB to ATA/ATAPI bridge and is working properly. I've tried uninstalling the driver and then just plugging the bridge in again. It then recognizes it as a ATA/ATAPI bridge again and says that my hardware is ready to use, but still no drive is showing. Shouldn't it show up as an IDE/SATA bridge? That's what it says on the bridge itself. Is it because I plugged in an ATA drive instead of an IDE or SATA? I don't really understand the difference, I'm afraid.

This has me a little puzzled. Any ideas?


Many thanks in advance.

If you know where your original driver is (the IDE/SATA to USB bridge), go into Device Manager, right click on your (messed up) hardware and choose Update Driver. When the next dialog box comes up and it asks if it's OK for Windows to search for the driver, select 'No not this time' and click Next. On the next screen select 'Install from a list or a specific location' and point it to the driver you want it to load.

Drivers adtec usb/atapi bridge adapter pinout

Thanks for the suggestion. I didn't know where the driver was in the first place as it installed it automatically the first time I plugged it in.

It's fixed now. My friend managed to figure out what to do in the end. All I had to do was go to Administrative Tools in Control Panel and pick Computer Management then Disk Management. The drive was showing up there and when I right clicked and choose Explore it popped up in My Computer and seems to be working fine. Nice!

Drivers Adtec Usb/atapi Bridge Adapter Download

Thanks again.

On the terms both the normal big connector and the smaller SATA connector both are a type of ATA. So the device manager entry is correct.

Drivers Adtec Usb/atapi Bridge Adapter Usb

Topic Closed

This topic has been closed to new replies.