Thorlabs USB Devices Driver Download

Posted By admin On 30/01/22

Instrument Driver for the LC1-USB Series; Description: VISA instrument driver for Thorlabs LC1-USB line cameras for National Instruments™ LabWindows™/CVI and LabVIEW™. Version: 2.2: Filesize: 0.8 MB: Download: ReadMe: Readme.rtf: Licence: LGPL.txt: System Requirements: Windows™ 2000/XP/VISTA. USB 2.0 high speed. The only thing that I found that was different between the two was in the device manager: on the computer that is not working, the power meter is listed under USB devices as PM200, and on the computer that is working, the power meter is listed under USB Test and Measurement Devices as USB Test and Measurement Device (IVI), but I don't really know if there's any significance to this.


Oculus ADB Drivers 2.0. This download contains the drivers required to use ADB with Android-based Oculus devices. Version 2 adds support for MTP mode connections.

This article helps to fix an issue in which Windows 10 doesn't install specific drivers for USB audio devices on the first connection.

Original product version: Windows 10, version 1703
Original KB number: 4021854


When you connect a USB audio device to a Windows 10 Version 1703-based computer the first time, the operating system detects the device but loads the standard USB audio 2.0 driver (usbaudio2.sys) instead of the specific device driver.


This issue occurs because the USB audio 2.0 driver (usbaudio2.sys) isn't classified as a generic driver in Windows 10 Version 1703. Therefore, the system assumes that a compatible, nongeneric driver is installed for the device even though the driver is generic.

This issue also causes Windows 10 Version 1703 to postpone the search for other compatible drivers through Windows Update that typically occurs immediately after you install a new device.


To fix this issue, use one of the following methods.

Method 1

To resolve this issue, install update 4022716.

Method 2

Thorlabs USB Devices Driver Download

Thorlabs USB Devices Driver Download

If the device-specific driver is distributed through Windows Update, you can manually update the driver by using Device Manager. For more information about how to do this, see update drivers in Windows 10.

Method 3

If the device is not yet connected, first install the device-specific driver, such as by using the appropriate installer. After the device-specific driver is installed, Windows 10 will select that driver instead of the standard USB audio 2.0 driver when you first connect the device.

Thorlabs usb devices driver download windows 7


See the device manufacturer's user guide for specific instructions about how to install the driver.

Method 4


Thorlabs Usb Devices Driver Downloads

If the driver isn't distributed through Windows Update, you can manually reinstall the driver. To do this, follow these steps:

  1. Install the device-specific driver (see Method 2).
  2. Open Device Manager.
  3. Right-click (or tap and hold) the name of the device, and then select Uninstall.
  4. Restart the computer.

Thorlabs Usb Devices Driver Download Windows 10

When it restarts, Windows will try to reinstall the device by using the device-specific driver.