Winfast Input Devices Driver

Posted By admin On 31/01/22

Unknown devices show up in the Windows Device Manager when Windows can’t identify a piece of hardware and provide a driver for it. An unknown device isn’t just unknown — it’s not functioning until you install the right driver. Windows can identify most devices and download drivers for them automatically. Introduction to Human Interface Devices (HID); 2 minutes to read; b; D; E; In this article. Human Interface Devices (HID) is a device class definition to replace PS/2-style connectors with a generic USB driver to support HID devices such as keyboards, mice, game controllers, etc. Prior to HID, devices could only utilize strictly-defined protocols for mice and keyboards. With my device driver I want to set just the GPIO pin 10 as output and read GPIO pin 14 as input. So I have to write a set up command into the “function set 1” register with offset 4. To get a clear situation I first set all GPIO pins 10 to 19 as inputs by the command.

Leadtek WinFast TV2000 XP Expert Driver

TV tuners

  • winfast tv2000 xp expert driver download
  • leadtek winfast tv2000 xp expert driver download
  • WinFast TV2000 XP Windows 7
  • winfast tv2000 xp expert windows 7
  • winfast tv2000 xp expert
  • winfast tv2000 xp expert driver
  • winfast tv 2000 windows 7 driver
  • leadtek winfast tv2000 xp expert windows 7
  • nu vot
  • leadtek winfast tv2000 xp expert driver windows 7
  • Operating system Windows 2000 / 7 32 bit / 7 64 bit / 9x / Vista 32-bit / Vista 64-bit / XP 32-bit / XP 64-bit
  • License: Freeware (free)
  • Developer: Leadtek

Leadtek WinFast TV2000 XP Expert Driver Download

Leadtek WinFast TV2000 XP Expert Driver for Windows 9x/ME/2000 and Windows XP/Vista/7 32/64-bit.

Devices
  1. There have been no reviews added as of yet. Be the first one to review.

Join the discussion

Please enable JavaScript to view the comments powered by Disqus.
-->

This article clarifies some confusion that vendors have experienced about how hardware that complies with PCI Power Management (PCI-PM) interacts with device drivers in the operating system and about how PCI-PM integrates with ACPI. For more information, see https://www.uefi.org/specifications

Device drivers and PCI power management

This discussion assumes that you are familiar with how Windows Driver Model (WDM) drivers handle power management events, as described in the current Windows DDK. In general, the responsibilities for device drivers are as follows:

Winfast Input Devices DriverDevices
  • Bus drivers: Bus drivers are responsible for enumerating, configuring, and controlling devices. For PCI-PM, the PCI driver is responsible for reading the PCI-PM registers to determine the capabilities of the hardware. When POWER IRPs request power state changes, the PCI driver writes to the PCI power management registers to set the hardware to different Dx states.

    When a device is enabled for wake-up, the PCI driver writes to PCI-PM registers to enable the device to fire PME (ACPI will also take an action, see the next section). Finally, when ACPI determines that the PCI bus is waking the system, the PCI driver scans PCI configuration space looking for which device is asserting PME, disables PME in that device, and notifies the driver for that device.

  • Device driver: The specific driver for the device is responsible for saving and restoring device context, and requesting power state changes as the policy owner for the device. When the device driver receives a POWER IRP requesting a lower device power state change, the device driver is responsible for saving any proprietary device context needed to later turn on the device. In some cases, there may be nothing to save.

PCI-PM registers are strictly the domain of the PCI driver--the IHV's device driver does not need to access any of these registers. Doing so would cause the system to not work reliably. The device driver's responsibility is to perform only proprietary actions.

Integrating ACPI and PCI PM

Some devices, particularly motherboard video devices in portables, may require both PCI Power Management as well as ACPI Source Language Assembler (ASL) to completely power manage the device. The PCI Power Management registers would control the internal state of a device, such as internal clocks and power planes. ASL would control the external state, such as external clocks and power planes, or in the case of video controllers, ASL would control the video backlights. Note that ASL and PCI-PM can only be combined on motherboard devices.

The OnNow architecture is a layered architecture, handling the integration of the device driver, PCI driver, and ACPI driver (and ASL) naturally. The following scenarios show the order in which drivers are called to handle these devices.

Note

For the above scenarios to work as described, a WDM driver must forward POWER IRPs correctly as described in the current version of the Microsoft Windows DDK.

Scenario 1: Turning off a device

Output Devices

  1. Device driver: Saves proprietary device state.
  2. PCI driver: Saves Plug and Play configuration, disables the device (interrupts and BARs), and puts the device in D3 using PCI-PM registers.
  3. ACPI driver: Runs ASL code (_PS3 and _OFF for power resources no longer in use) to control the state external to the chip.

Scenario 2: PCI power management and device drivers

  1. ACPI driver: Runs ASL code (_PS0 and _ON for any OnNow required power resources) to control the state external to the chip.
  2. PCI driver: Puts the device in D0 using PCI-PM registers and restores Plug and Play configuration (interrupts and BARs--these might be different from what the device was previously on).
  3. Device driver: Restores proprietary context in the device.

Scenario 3: Enabling wake-up

  1. Device driver: Sets proprietary registers in the chip to enable wake-up. For example, in pattern matching network wake-up, this is when the patterns would be programmed into the adapter.
  2. PCI driver: Sets the wake-up enable bits in the PCI PM registers to allow the device to assert PME.
  3. ACPI driver: Enables the GPE in the chip set associated with PME (as described by the _PRW object listed under the root PCI bus).

Scenario 4: Wake-up

Winfast Input Devices Driver Updater

  1. ACPI driver: Wakes and scans the GPE status bits for wake-up events, disabling GPEs for set GPE status bits, and running any _Lxx or _Exx methods associated with set GPE bits. In response to a wake-up notification on the PCI bus, the ACPI driver will complete the PCI driver's WAIT_WAKE IRP to notify the PCI driver that it is waking the system.
  2. PCI driver: Scans configuration space looking for any devices with a set PME status bit. For each device, it disables PME and completes the WAIT_WAKE IRP for that device to inform the driver that it is asserting wake-up. The PCI driver stops scanning for wake devices when it has made a complete pass through all PCI devices having not found any asserting PME and when PME stops being asserted.
  3. Device driver: Requests the device be put in D0 (see scenario 2) and sets any proprietary registers in the chip required to handle the wake-up event.

Call to action on PCI power management and device drivers

Winfast Input Devices Driver Updater

  • Integrate ACPI and PCI-PM capabilities into your devices as described in this article.
  • The PCI Power Management specification is available at https://www.pcisig.com. This link leaves the Microsoft.com site.
  • ACPI Specification available at https://www.uefi.org/specifications. This link leaves the Microsoft.com site.
  • The ACPI Component Architecture (ACPICA) compiler can be found at https://acpica.org/downloads/binary-tools.